Installation Manual

Outdoor Placement
F
or the most accurate temperature readings choose a location
that will not be exposed to direct sunlight or other heat
sources. The clock is water-resistant and designed for
general outdoor use, however, to extend its life, place
the clock in an area protected from direct weather
elements.
To Set Time:
Turn the set knob on back of the clock movement in either
direction.
To Start Clock:
Clock requires one "AA" battery (not included).
Insert one "AA" battery (not included) as indicated in the
battery compartment.
Thermometer Calibration:
The pointer may move during shipping, causing the
thermometer to read temperature inaccurately. If the
thermometer is reading incorrectly, compare the temperature
reading to a known accurate thermometer. Let both
thermometers adjust to room temperature for at least three
hours. If the new thermometer continues to read inaccurately,
adjust the pointer by turning knob on the back of the unit in
the approriate direction.
Instruction Manual
Clock/Thermometer
Questions? Contact Customer Support at
[phone] or visit www.AcuRite.com.