Instructions

REMOVE BATTERY

COMPARTMENT COVER

Battery Pack for AcuRite

Atlas

Model 06074:

REMOVE BATTERY PACK COVER

INSERT BATTERY PACK CORD

LOOP CORD AND REPLACE

BATTERY COMPARTMENT COVER

1. Remove battery compartment cover from the 2. Plug the battery pack cord into the battery

. Loop the cord through the slot, then replace the

4. Remove the battery pack cover by pulling

bottom of the AcuRite

Atlas

outdoor device. compartment AcuRite

Atlas

battery compartment cover.

upward on the cover’s tabs (away from the

Remove batteries if currently installed.

battery pack).

INSTALL BATTERIES

5. Insert 4 x AA alkaline or lithium* batteries into

the battery compartment. Heavy duty or

rechargeable batteries are not recommended.

REPLACE COVER

SECURE CABLE

MOUNT BATTERY PACK

6. Replace the battery pack cover.

7a. Mount the battery pack using the integrated

7b. Use the included zip ties and hardware to

hang holes. We recommend mounting on a

secure excess cable near the battery pack,

pole or a flat surface such as a wall or post.

leaving enough slack for a “drip-loop,”

The battery pack is water-resistant and is

preventing rain water from trailing into the

designed for general outdoor use.

battery pack. Installation is complete.

* Cold temperatures can cause alkaline batteries to function improperly. Use lithium batteries for temperatures below -4°F (-20°C).

QSG17

06074 082817