Troubleshooting guide

ManualsBrandsAcuRite ManualsClockSet and Forget

DEMONSTRATION

MILLPWR

®

Operation Manual

4-3

Consider

entering a Tool

Position. This

will enable you

to go to a loca-

tion away from

your workpiece

to change tools.

• Arrow down to SPINDLE.

• To use a forward spindle direction.

Press the

FORWARD softkey then

press the

ENTER key.

• Set the cutter’s spindle speed for 1300 RPM.

• Press the

USE key.

You don't have to press the

ENTER key after the last

value—you can just press USE.