Troubleshooting guide

DEMONSTRATION
MILLPWR
®
Operation Manual
4-9
• Press the
LINE key.
• Enter the following information:
TO: X2 = .75 INC
• Now press the
ABS/INCR key.
MILLPWR assumes that you want to use the
X coordinate of the “From” point (X1) as your
incremental reference, which is exactly what
is needed.
• Press
ENTER to confirm this and again to accept the
value.
• Now enter the location of Y2 in the “To” field:
TO: Y2 = 0 ABS
• Press the
USE key.