User's Manual

RX INN Installation Guide Page: 25
802.11a 22 dBi external flat
panel directional antennas.
Description.
Transmit power to antenna. Radio and system dependent, typically between 100 – 400
mW (20–26 dBm).
FCC approved maximum
power.
12 dBm.
Antenna gain. 22 dBi.
Horizontal beamwidth. 9 degrees.
Vertical beamwidth. 9 degrees.
Polarity. Linear polarised (typically vertically oriented).
Model. PAN22.
Impedance. 50 ohms.
Coaxial cable. LMR 195, LMR 400, LMR 600.
EIRP at external antenna. Depends on radio and system losses, typically 100 mW – 4
W (20 – 36 dBm).
Connector. Standard N.
FCC Approval
The maximum power output for each RX INN is set through the RAMP
configuration software. The country setting will be set to FCC which will limit the
power output to that listed in the table above and customers will not be able to
change this setting.