INSTALLER USER MANUAL X1-N-24 Version 1.
Acurix Networks -‐ User Manual X1-‐N-‐24.docx Table of Contents 1. FCC and Other Disclosures .......................................................................................... 4 1.1 1.2 1.3 1.4 1.5 1.6 Copyright Notice ..............................................................................................................4 FCC Statement .....................................................................
Acurix Networks -‐ User Manual X1-‐N-‐24.docx 1. FCC and Other Disclosures 1.1 Copyright Notice Copyright © 2010 Acurix Networks. All rights reserved. This document may not be reproduced or disclosed in whole or in part by any means without the written consent of Acurix Networks.
Acurix Networks -‐ User Manual X1-‐N-‐24.docx Any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment. 1.5 Safety Warnings This unit must be installed by a trained professional installer only.
Acurix Networks -‐ User Manual X1-‐N-‐24.
Acurix Networks -‐ User Manual X1-‐N-‐24.docx 2. X1-‐N-‐24 Overview 2.1 Introduction The Acurix Networks X1-‐N-‐24 intelligent wireless node delivers seamless point-‐to-‐point backhaul connectivity at up to 300 Mbps with links using 20, or 40 MHz channels.
Acurix Networks -‐ User Manual X1-‐N-‐24.docx 3. Equipment 3.1 Shipped Equipment List The following is normally shipped: 1 x X1-‐N-‐24 node 1 x External power supply (48v output) 1 x passive PoE injector 1 X Quick Install Instructions 1 x CD software Page 8 of 12 Confidential.
Acurix Networks -‐ User Manual X1-‐N-‐24.docx 4. Hardware Installation 4.1 Ethernet Connections The X1-‐N-‐24 has one Ethernet 10/100BaseT interface. Its supports Auto-‐MDIX, automatically sensing and adjusting to work with whatever type of Ethernet device is at the other end of the Cat5 cable.
Acurix Networks -‐ User Manual X1-‐N-‐24.docx 5. 5.1 Software Configuration Overview The X1-‐N-‐24 will be delivered in configuration mode so that installers may make a web based connection to the unit for correct operation within their environment.
Acurix Networks -‐ User Manual X1-‐N-‐24.docx 4. Set the IP address to 192.168.0.2 as shown below. 5. Select OK. Page 11 of 12 Confidential.
Acurix Networks -‐ User Manual X1-‐N-‐24.docx 6. Go to the Command Processor and check that that you can ping the notebook at the address 192.168.0.2. 7. Then verify that you can ping the X1-‐N-‐24 at its default address 192.168.0.1. 8. 5.3 Communications and connecting via a notebook has been completed.
Acurix Networks -‐ User Manual X1-‐N-‐24.docx The login prompt will appear: The username is: admin The password is: admin Page 13 of 12 Confidential.
