Operation Manual

EN
31
EN
BNE : 664Y6000 •D
MAINTENANCE
It is recommended to stop the boiler and have it serviced during good weather
conditions.
CLEANING THE BURNER AND THE HEATING BODY
Set-up conditions
• Boiler shut-down
• External power supply isolated
• Oil supply closed
Procedure
1. Open the front panel.
2. Release the burner flange and place the burner in the maintenance position to clean it (see
the burner manual).
3. Remove the burner
4. Open the heating body door.
5. Using a brush, clean the soot that may be present in the heating body and on the turbulators.
6. Check the correct position of the braid.
Follow-on tasks
• Close the door and tighten with sufficient torque to ensure it is sealed against combustion
products.
• Reinstall the burner flange and the burner.
• Close the front panel.