Specifications

4
DIMENSIONS
The units are delivered fully assembled, tested and packed on a timber base with shockproof edges and protected by heat-shrunk plastic film.
On reception and after unpacking, check the equipment for domage. For transport purposes, refer to the weight and dimensions give below.
TECHNICAL SPECIFICATIONS
B C
GF
D
A
E
I J
KK
H
L
E-tech S 160 E-tech S 240 E-tech S 290 E-tech S 290 E-tech S 380 E-tech S 380
single phase tri phase mono phase tri phase
Output kW 14.4 14.4 14.4 28.8 14.4 28.8
Operating voltage Volt 230 230 230 3 x 400 + N 230 3 x 400 + N
Total capacity L 161 242 295 295 394 394
Primary circuit capacity L 55 68 97 97 127 127
Central heating connections Ø 1” 1” 1” 1” 1” 1”
Domestic hot water connections Ø 3/4” 3/4” 1” 1” 1 1/2” 1 1/2”
Hot water tank exchange surface m
2
1.26 1.87 2.0 2.0 2.6 2.6
Weight when empty kg 115 155 202 202 230 230
Domestic hot water max. pressure bar 10 10 10 10 10 10
Central heating max. pressure bar 333333
Expansion tank 1 x 8 L 1 x 8 L 2 x 8 L 2 x 8 L 2 x 8 L 2 x 8 L
Max. T° setting °C 85 85 85 85 85 85
A mm B mm C mm D mm E mm F mm G mm H mm I mm J mm K mm L mm
160 1432 620 720 1282 290 43 265 405 310 127 180 126
240 1953 620 720 1800 290 43 265 405 310 127 180 126
290 1784 720 800 1627 300 92 265 435 360 94 135 96
380 2134 720 800 1985 300 92 265 435 360 94 135 96
GENERAL FEATURES