Installation manual
Page 23
When setting up your speaker array using the PC
program, select the side THEATER tab, the PRO
SETUP top tab and then the 1-SPEAKERS sub
tab. To select the speaker’s size, press NONE,
SMALL or LARGE. To adjust the frequency roll-off
point for just that speaker(s), adjust FREQ UP or
DN. When adjusting the Back Surround speakers,
note that you must have the Surround speakers
set to either LARGE or SMALL in order to have
Back Surround speakers at all.
The TRACK CROSSOVER FREQ option raises
and lowers the frequency roll-off point for all
speakers together (other than the subwoofer).
To store a preset, press the SPEAKER STORE
# button.
From the front of the Cinema Rhapsody Mach 4,
while in the setup mode, use the Mode knob to
navigate to the word PRO SETUP and press the
Mode knob.
On the page that features LABELS/AV, use the
Mode knob to navigate to the SPEAKERS option
and press the Mode knob.
You are now on the Speakers page with the L and
R channels are inverted. The front speaker are
now able to be adjusted. Turning the Input knob
will adjust the speaker size (L=large, S=small).
For other speakers the option for none exists
and is represented by the absence of a speaker
symbol.
To set the Crossover Frequency, turn the Mode
knob to CROSSOVER and press the Mode Knob.
Turn the Mode knob to select the channels you
wish to adjust and use the Input knob to change
the frequency levels. Repeat these steps for all
speakers you wish to adjust. To adjust the fre-
quency for all speakers at the same time (other
than the subwoofer), turn the Mode knob until the
cursor is on ALL. Turn the Input knob to adjust all
frequencies together.
To store the Speaker Presets, while on the Cross-
over page, turn the Mode knob to STORE. Turn
the Input knob to select the desired Preset #. To
store the current speaker conguration including
speaker sizes, crossover values, etc, press the
Input Knob.
To view the current Speaker setup, select UP-
DATE SPEAKERS. To view the settings of any
of the four possible Speaker Presets, press the
SPEAKER RECALL 1-4 buttons at the bottom of
the window (do not press SPEAKER STORE).