Installation manual

Page 41
Recalling Factory & Storing/Recalling Installer Defaults
The Cinema Rhapsody Mach 4 features both a
Factory Default as well as an Installer Default.
The Factory Default can be recalled in the event
you wish to begin the process of setting up the
Cinema Rhapsody Mach 4 from a clean start.
Note that recalling the Factory Default does not
reset the Installer Default, providing one was
saved rst.
To recall the Factory Default is available only in
the PC program. Simply press the Factory Default
Recall button. The Cinema Rhapsody Mach 4 will
reset and power down and then up. The factory
default does not reset input congurations or the
PEQ.
When you are done with your custom input con-
guration and setup, ADA strongly suggests sav-
ing your setup on the Installer Default. You can
provide the Installer Default Recall button on a
touchscreen or remote control so that in the event
the system was tampered with inadvertently, your
customer can reset the unit to the way you left the
system. To store the Installer Default from the PC
program, press the Installer Default Store button
(also saving PEQ and input congurations).
To recall the Installer Default in the PC program,
simply press the Installer Default Recall button.
The Cinema Rhapsody Mach 4 will reset and
power down and then up.