Cinema Rhapsody Mach IV Home Theater Controller User Manual HDMI 1.4 - April 2011 602-610 Mamaroneck Avenue, White Plains, NY, 10605, www.ada-usa.
Contents Safety Instructions & Electrical Warning.........................................................................................3 AC Connections..................................................................................................................................4 Power Amplifier (& Powered Subwoofer) Connections..................................................................5 Introduction - Front Panel Controls & Displays...............................................................
Safety Instructions & Electrical Warning READ INSTRUCTIONS - All the safety and operating instructions should be read before the appliance is operated. RETAIN INSTRUCTIONS - The operating instructions should be retained for future reference. HEED WARNING - All warnings on the appliance and in the operating instructions should be adhered to. FOLLOW INSTRUCTIONS - All operating and use instructions should be followed.
AC Connections AC Connection The Cinema Rhapsody Mach 4 features a dualprimary type of power supply that operates on 115V~/60Hz as well as 230V~/50Hz. When using the Cinema Rhapsody Mach 4 with non-US Standard AC power cords, the user must supply the appropriate EIC Female to Male AC power cord. Before You Begin As you remove the Cinema Rhapsody Mach 4 from its packaging, inspect the condition of the component prior to proceeding with the following steps for AC connection.
Power Amplifier (& Powered Subwoofer) Connections Audio Connections The Cinema Rhapsody’s Audio Outputs are clearly marked in a white field on the back of the unit. ADA strongly suggests not using directional interconnects that lift the grounds. This diagram includes ADA’s PTM-8150 Eight Channel Power Amplifier.
Introduction - Front Panel Controls & Displays Overview The Cinema Rhapsody Mach 4 is factory set for optimum operation. This section details the front panel features of the Cinema Rhapsody Mach 4. All component functions can be operated through the three control knobs located on the units front panel. The front panel displays are also explained in this section.
Power On, Mute, Off, & Master Volume Control When the Cinema Rhapsody Mach 4 is off, turning any knob or pushing any knob other than the Volume knob will cause the Cinema Rhapsody Mach 4’s center LCD display to indicate that you need to push the knob to turn it on. Power On Press the Cinema Rhapsody Mach 4’s Volume knob to engage power on. Front Plate To turn on the Cinema Rhapsody Mach 4, providing the unit is not in Mute, press the Volume knob once.
Input Selector T INPUT r elect To S pon Anoth n ent e m ur Co SELECTOR The Cinema Rhapsody Mach 4 permits you to scroll to the next input without having all of the components you are passing actively process through the Cinema Rhapsody Mach 4. This prevents the clicking that is commonly associated with changing TV channels up and down. To best access another component from the front of the Cinema Rhapsody Mach 4, turn the Input Selector knob.
Mode Selector & Mode Descriptions Tu MODE SELECTOR Front View r Select An To Mode oth n e r The Cinema Rhapsody Mach 4 permits you to scroll through available modes without necessarily engaging the mode until you have found the one you wish to use. As you turn the mode knob, the top line of the Cinema Rhapsody Mach 4’s display will read the modes available. The lower left-hand of the display indicates the current mode. When the desired mode displayed on the top line, press the Mode knob.
Dolby Pro Logic IIx Audio Stream Processing Algorithm (Continued) PL2 Mve +THX LF/RF/C/LS/RS/LB/RB/Sw Adds THX filters to Pro Logic 2 Movie PL2 Custom LF/RF/C/LS/RS/LB/RB/Sw Custom settings for Pro Logic 2 Movie - permits adjustment of PL II PL2 Cstm1 +THX LF/RF/C/LS/RS/LB/RB/Sw Adds THX filters to PL Custom mode (above) PL2 Custom 2 LF/RF/C/LS/RS/LB/RB/Sw Custom 2 settings for Pro Logic 2 Movie - permits adjustment of PL IIPL2 Cstm2 +THX LF/RF/C/LS/RS/LB/RB/Sw Adds THX filters to PL Custom mode (above) PL2
Rear Panel Connections Composite HDMI S-Video Ethernet HDMI ADA Bus Low Component Video Input (8) Audio/Video Input (8) & 10/100T Audio/Video Data Voltage Video Input (8) & Output (4) Input (8) Output (2) Jack Input (8) Port Triggers (2) & Output (2) Cinema Rhapsody Mach 4 Analog Audio Stereo Input (8) Analog Record Output Balanced Eight Channel Audio Output (7.1) Digital Audio Analog 8-Ch Main Eight Bypass Channel Audio TOS-Link (3) & Coax (5) Input Input Output (7.
Custom Input Configuration The Cinema Rhapsody Mach 4 is an incredibly flexible home theater controller that can accommodate a wide array of components. For easy and quick setup, one can use the “Out of the Box” input configuration. One can also elect to do a completely “Custom Input” configuration or a combination of “Out of the Box” and “Custom Input” configurations.