Owner`s manual

ADA MP-1 Owner’s manual
1.0 INTRODUCTION
Thank you for purchasing the ADA MP-1 MIDI Programmable Tube Preamp. You
now own the most tonally flexible and technologically advanced guitar amplification
device available. Your MP-1 will store 128 programs of exactly the right tone. (no
matter what kind of music you play.)
The MP-1 features a unique Tri-State Voicing selection that allows you to choose
between Distortion Tube, Clean Tube, or Solid State circuits for each program. The
EQ points were designed to replicate the sound of Fender and Marshall, but the
Presence control surpasses the range offered by either.
The stereo Chorus utilizes analog circuitry which complements the warmth of tubes
to give you the best possible sound.
The software in the MP-1 provides the fullest implementation of MIDI available. Since
the MP-1 is software-based, it will never grow obsolete. As the MIDI standard
evolves, your MP1 can be updated by simply changing the program ROM. In the
manual, you will find references to different levels of software. When you power up
your MP-1, the display indicates which level of software is installed. On power-up,
"ADA" is displayed first, followed by a 3 digit number. The first of these digits is the
level of software installed. To properly set-up and familiarize yourself with the MP-1,
read and follow these operating instructions completely. If you can't wait and want to
jump right into the MP-1, go to section 1.1 QUICK SET-UP. We hope that the
unlimited tonal possibilities and unmatched technological capabilities of your MP-1
will inspire you to great things.
IMPORTANT: Please take this time to fill-out and return the enclosed warranty card
so we may provide you information on future software updates.
Page 3 of 26