Owner`s manual

• Press the PRGM EDIT button to enter Program Edit mode.

• Press the "REAL-TIME MIDI" button to select the RTM section. The first screen

sets the edit mode.

Making RTM Assignments in Quick Mode

• If RTM Edit Mode is not set to "Quick", press the "v" button once to toggle it

from "Expert" to "Quick."

• Press the ">" button to step to the next screen.

• Move the controller slightly. The MP-2 will detect the MIDI controller number

and whether it is a switch-type or continuous controller, then assign it to the

slot, although it will not display the number. (Viewing controller number

assignments can be done in Expert mode.) The display will show the

parameter, if any, currently assigned to that controller. If there is no current

assignment, the display will show:

• Use the "v" and "∧" buttons to choose the parameter you wish to control from

the picklist

of available choices.

Notice that only toggle parameters are available when a switch-type controller

is detected, and only variable parameters are available when a continuous

controller is detected.

• Press the ">" arrow once to step to the next screen. This is the RTM Preview

function.

• Operate the controller and check that the effect is satisfactory.

• Press the "<" button when you are finished previewing and the display will

return to the "Move Pedal or Press Switch" message. You are ready to make

your next assignment.

The Next Step

Now that you have completed the MP-2 Tutorial, you should be able to plug in

and get great sounds. But there is much more yet to discover. See the Reference

chapter for complete descriptions of all the MP-2's features, and feel free to

experiment to find out for yourself how the MP-2 can work for you.

OTE: If the MIDI Mismatch Warning feature in System Edit is set to "ON," the MP-2 will display

the

reviousl

shown error messa

e i

it receives MIDI data on a channel other than its own.

Page: 32