Owner`s manual

The Real-Time MIDI Preview feature enables the effect of RTM assignments to be
auditioned without leaving the RTM section or Program Edit mode.
NOTE: Be sure a MIDI controller is properly connected to and set up to communicate
with the MP-2 before attempting to work with RTM.
RTM Edit Mode (Quick/Expert):Sets edit level for programming RTM.
Macros
In Quick mode, eight additional entries appear in the parameter picklist for continuous
controllers. These are macros, factory-programmed groups of parameters that are all
changed simultaneously by the controller assigned to that slot. Macros do use up multiple
slots. Here is a list of macros and descriptions:
Table 4: Macro Descriptions
V-CURVE Goes from mid-rangy EQ to extreme V-shaped curve with only a
slight level change.
GRIND Goes from barely distorted (pedal back) to heavy grind (pedal
forward). Tweaked for use with high gain voices.
STEREO FX MIX Controls both A and B Effects Loop Mixes at the same time.
SUSTAINER Great for going from rhythm to lead, but continuously variable.
Brings in more gain, fat mids, and overall volume, while taking out
the noise gate for infinite sustain with no gate "chatter". Designed
for high-gain voices.
MELLOW WAH A Pedal Wah that doesn't sound harsh or take your head off when
using Stratocasters or other bright guitars. The program must have
Wah Filter Status set to "In" and be in Pedal mode.
AUTO-WAH/TREM Crossfades between two different automatic effects. Cocking the
pedal forward gets you AUTOWAH, and brining it back gradually
makes it TREMOLO. The program must have Tremolo Status set
to "On", Tremolo Waveform set to "Surf, Wah Filter Status set to
"On", and Wah Mode set to "Auto".
T-WAH DEPTH The more forward the pedal is pushed, the more prominent the
Triggered Wah effect, but when the pedal is moved back it doesn't
become muffled because the Wah Start Point moves up.
Table 4: Macro Descriptions
MODULATION An organ modulation sound. Tremolo Status and Chorus Status
must both be set to "On" in the program.
Macros may be examined and altered in Expert mode, and the resulting, altered RTM
assignments may be stored, but user-altered-or -created assignments are not stored as
Macros, that is, they cannot be titled and do not appear in the picklist.
Page: 41