Data Sheet

RB-Ada-170
Jumper Wires Premium 6" F / F Pack of 20
These female-female jumper wires are handy for making wire harnesses or jumpering between headers
on PCB's. These premium jumper wires are 6" (150mm) long and come in a 'strip' of 20 (2 pieces of
each of ten rainbow colors). They have 0.1" female header contacts on either end and fit cleanly next to
each other on standard-pitch 0.1" (2.54mm) header. The best part is they come in a 20-pin ribbon cable.
You can always pull the ribbon wires off to make individual jumpers, or keep them together to make
neatly organized wire harnesses.
For best results, when plugging these in a line, have the sides with the 'silver latch bit' sticking out since
that side is a tiny bit wider than 0.1"
Specification
• Length: 150mm / 6"
• Weight: 13.5g
• Each wire is 28 AWG (7 strands @ 36 AWG)