Product Specifications

Doc. No.
Q/WAPL503562-1011
Edition No.
1.0
Polymer Lithium-ion battery
Product S
p
ecification
2/10
1 Scope
This product specification describes polymer lithium-ion battery. Please using the test
methods that recommend in this specification. If you have any opinions or advices about the test
items and methods, please contact us. Please read the cautions recommended in the specifications
first, take the credibility measure of the cells using.
If the cells should be using at the environment that not preferred in this document, please
connect with our first and get our authorization. For the reason of stable performance and better
safety, battery pack with more than 2 cells connected in serial way should be charged with a
balance charger.
It is claimed that we should have no any responsibility with the contingency and loss due to
the cells wrong usage (not preferred in the product specification).
2 Product Type, Model and Dimension
2.1 Type
Polymer lithium-ion battery
2.2 Model
503562(Cell adding Ni Tabs)
2.3 Cell Dimension(Max, Thickness×Width×Lengthmm
3
)5.0×35×62
Pack Dimension(Max, Thickness×Width×Lengthmm
3
)5.2*35.5*62.5(with pcm)
3 Specification
Item Specifications Remark
Nominal Capacity 1200mAh 0.2C
5
A discharge25
Nominal Voltage 3.75V
Average Voltage at 0.2C
5
A
discharge
Standard Charge Current 0.2 C
5
A Working temperature0
40
Max Charge Current 1C
5
A Working temperature0
40
Charge cut-off Voltage 4.2V CC/CV
Standard Discharge Current 0.5C
5
A Working temperature
25
Dischar
g
e cu
t
-off Volta
ge
2.75V
Cell Voltage 3.7-3.9V When leave factory
Impedance
50
m
Ω
AC 1KHz after 50% charge,25
Weight Approx:22g
1month
-10
45
3month
0
30
Storage
temperature
6month 20±5
Storage humidity 65±20% RH
Best 20±5
for long-time
storage
4. General Performance
Definition of Standard charging method
At 20±5
charging the cell initially with constant
current 0.2C
5
A till voltage 4.2V, then with constant voltage4.2 till current declines to 0.05C
5
A.