Datasheet

Assembly and Wiring

Assembly:

These boards come with all surface-mount components pre-soldered. The included header

strip can be soldered on for convenient use on a breadboard or with 0.1" connectors. However,

for applications subject to extreme accelerations, shock or vibration, locking connectors or

direct soldering plus strain relief is advised.

Prepare the header strip:

Cut the strip[ to length if necessary. It

will be easier to solder if you insert it into

a breadboard - long pins down.

Add the breakout board:

Place the breakout board over the pins.

And Solder!

Be sure to solder all pins for reliable

electrical contact.

Wiring:

Connect the Power:

Connect the GND pin to GND on the Arduino.