Datasheet

LSM303DLHC Module specifications
Doc ID 018771 Rev 1 9/42
2 Module specifications
2.1 Sensor characteristics
@ Vdd = 2.5 V, T = 25 °C unless otherwise noted
(a)
.
a. The product is factory calibrated at 2.5 V. The operational power supply range is from 2.16 V to 3.6 V.
Table 3. Sensor characteristics
Symbol Parameter Test conditions Min. Typ.
(1)
Max. Unit
LA_FS
Linear acceleration
measurement range
(2)
FS bit set to 00 ±2
g
FS bit set to 01 ±4
FS bit set to 10 ±8
FS bit set to 11 ±16
M_FS Magnetic measurement range
GN bits set to 001 ±1.3
gauss
GN bits set to 010 ±1.9
GN bits set to 011 ±2.5
GN bits set to 100 ±4.0
GN bits set to 101 ±4.7
GN bits set to 110 ±5.6
GN bits set to 111 ±8.1
LA_So Linear acceleration sensitivity
FS bit set to 00 1
mg/LSB
FS bit set to 01 2
FS bit set to 10 4
FS bit set to 11 12
M_GN Magnetic gain setting
GN bits set to 001 (X,Y) 1100
LSB/
gauss
GN bits set to 001 (Z) 980
GN bits set to 010 (X,Y) 855
GN bits set to 010 (Z) 760
GN bits set to 011 (X,Y) 670
GN bits set to 011 (Z) 600
GN bits set to 100 (X,Y) 450
GN bits set to 100 (Z) 400
GN bits set to 101 (X,Y) 400
GN bits set to 101 (Z) 355
GN bits set to 110 (X,Y) 330
GN bits set to 110 (Z) 295
GN bits set to 111
(2)
(X,Y) 230
GN bits set to 111
(2)
(Z) 205