Datasheet

Add more jumpers
for the Sensors
From Analog Pin 0 to the
hole near the light sensor
and resistor. (white)
From GND to the hole next
to the other end of the
resistor (black)
From the Analog pin 1 to
the hole next to the center
pin of the temperature
sensor (green)
And also for the
LEDs
From L1 to Digital Pin 2
(yellow)
From L2 to Digital Pin 3
(yellow)
© Adafruit Industries https://learn.adafruit.com/adafruit-data-logger-shield Page 57 of 85