Datasheet

Add more jumpers for the
Sensors
From Analog Pin 0 to the hole near the
light sensor and resistor. (white)
From GND to the hole next to the other
end of the resistor (black)
From the Analog pin 1 to the hole next to
the center pin of the temperature sensor
(green)
And also for the LEDs
From L1 to Digital Pin 2 (yellow)
From L2 to Digital Pin 3 (yellow)
© Adafruit Industries https://learn.adafruit.com/adafruit-data-logger-shield Page 40 of 68