Datasheet

Add more power to your robot with this metal-geared servo. The tiny little servo

can rotate approximately 180 degrees (90 in each direction), and works just like

the standard kinds you're used to but

smaller

. You can use any servo code,

hardware or library to control these servos. Good for beginners who want to make

stuff move without building a motor controller with feedback & gear box, especially

since it will fit in small places. Of course, its not nearly as strong as a standard

servo. Works great with the Motor Shield for Arduino, our 16-channel Servo Driver,

or by just wiring up with the Servo library. Comes with a few horns and hardware.

To control with an Arduino, we suggest connecting the orange control wire to pin 9

or 10 and using the Servo library (http://www.arduino.cc/en/Reference/Servo)

included with the Arduino IDE (see here for an example sketch

(http://arduino.cc/en/Tutorial/Sweep)). Position "0" (1.5ms pulse) is middle,

"90" (~2ms pulse) is all the way to the right, "-90" (~1ms pulse) is all the way to the

left.

Page 2 of 2

201

htt

://www.adafruit.com/

roduct/114