Datasheet

Programming and Calibration

Install the Library:

Download the ADXL345 library (http://adafru.it/aZn) and install it. You will also need the

Adafruit Sensor Library (http://adafru.it/aZm) if you do not already have it installed.

This guide (http://adafru.it/aYM) will help you with the install process.

Test:

Click "File->Examples->Adafruit_ADXL345->sensortest" to load the example sketch from

the library.

Then click on the compile/upload button to compile and upload the sketch to the Arduino.

You should see output similar to below. Watch the values change as you move the board

around.