Datasheet

SD Logging

Finally we get to the fun stuff! Its time to log data from the GPS onto an SD card. First up we'll do a

basic test to make sure the SD card system is working.

You'll need a microSD card to log data onto. Any capacity will do. Slide the microSD card into the

silver socket. You can push it in and you'll feel it latch and click

To remove, push on the edge and it will pop out (be careful it doesn't fly across the room!)

SD Card Library Update

If you are using an Leonardo or Mega, you will have to update the SD card library to add 'SD card

on any pin' support. If you have an Uno/Duemilanove/Diecimila, this is not required.

First, find the "core libraries" folder - if you are using Windows or Linux, it will be in the folder that

contains the Arduino executable, look for a libraries folder. Inside you will see an SD folder (inside