Datasheet

Breakout and Proto-area

Since the GPS module is so small, we had tons of space left over, we turned that into a proto area.

Feel free to put any circuitry you'd like into the 0.1" spaced holes. None of the holes are connected.

There's also a few breakouts near the SoftSerial/Direct switch. For example, the PPS pin which

provides pulse-per-second output when the GPS has a fix.

3V - this is the output from the onboard 3V regulator, it provides ~100mA if you need another

3V supply

CD - this is the card-detect output from the microSD socket, it is shorted to ground when a

card is not inserted. You'll want to have a pullup if you plan to use this pin to detect if a card

is inserted

CCS - this is another breakout for the Card Chip Select line. By default its connected to digital

10 but if you want to change it you can cut the trace from here to #10 and then solder in a

new wire

PPS - pulse-per-second output when the GPS has a fix

TX and RX - extra 'copies' of the GPS RX/TX pins - the RX pin is 5V friendly.