Datasheet

Shield Headers

The Ultimate GPS Logger shield comes tested assembled with a GPS unit and microSD socket

already on it, but you'll still need need to put headers on so you can plug it into an Arduino

We don't pre-assemble the headers on because there's two options! You can either use plain 0.1"

male headers (included with the shield) or Arduino Shield Stacking headers (http://adafru.it/85).

Assembly with male headers

Most people will be happy with assembling he shield with male headers. The nice thing about using

these is they don't add anything to the height of the project, and they make a nice solid connection.

However, you won't be able to stack another shield on top. Trade offs!

If you want to go with male headers, break off the

36-pin long stick into either 2 x 8pin and 2 x 6pin or

1 x 10pin, 2 x 8pin and 1 x 6pin (depending on how

many headers your Arduino has and which version

it is)

Place the header onto your Arduino, with the long

pins down.