Datasheet

Prepare the breadboard
Place the VS1053 breakout on the breadboard.
Center it so that there is one row of holes on
each side.
Add the breakout friendly headphone jack and
wire power and ground jumpers as shown.
VCC -> 5v
GND -> GND
Connect SPI and Reset
Add jumpers for:
CLK -> Arduino #13 (Mega 52)
MISO -> Arduino #12 (Mega 50)
MOSI -> Arduino #11 (Mega 51)
CS -> Arduino #10
RST -> Arduino #9
Connect the rest of the digital
signals
Add more jumpers for:
XDCS-> Arduino #8
SDCS -> Arduino #4
DREQ -> Arduino #3
© Adafruit Industries
https://learn.adafruit.com/adafruit-vs1053-mp3-aac-ogg-midi-wav-
play-and-record-codec-tutorial
Page 12 of 32