Datasheet

Connect with a USB console cable (optional) (https://adafru.it/aUB)

Handy for debugging especially when connecting to the access point hosted by the Pi

When done you should have a Pi that is booting Raspbian, has working Ethernet, and you can connect to with a USB

console cable and log into the Pi via the command line interface.

Then follow our Pi-as-Access-Point tutorial (https://adafru.it/cg6)to set up the Pi as a wifi access point router.

When done you should be able to connect to the Pi as a WiFi access point and connect to the internet through it.

It is possible to do this tutorial via ssh on the Ethernet port or using a console cable.

If using a console cable, even though the diagram on the last step shows powering the Pi via the USB console cable

(red wire) we suggest not connecting the red wire and instead powering from the wall adapter. Keep the black, white

and green cables connected as is.