Datasheet

Servos as Input Devices

Another neat feature of feedback servos is that they can be used as an input device too! The

Servo Record/Play Demo lets you record a series of servo movements, then it will replay them

back for you! The recorded positions are saved in EEPROM, so they will be remembered even

after resetting or powering down the Arduino

To run this demo, first wire up your Servo as in the Fritzing diagram below:

Compo nents used:

Arduino Uno (http://adafru.it/50)

Feedback Servo (http://adafru.it/1404)

2x pushbuttons (http://adafru.it/1119)

LED (http://adafru.it/299)(most any 3 or 5mm led will work)

220 ohm resistor

Misc. jumpers (http://adafru.it/758)

Breadboard (http://adafru.it/64)