Datasheet

DESCRIPTION
It's rare to find a mini kit so elegant, it deserves its own Haiku.
A simple breakout, 2x3 box header in the center, two 1x3's on
the side. Plugs into any breadboard for neat wiring (in both
nifty and clean senses of the word).
Comes with a quality mini PCB, a 2x3 box header and a small
stick of 0.1" header. Requires some light soldering to use: plug
the 2x3 in on the top and solder all six pins, then break the
header in half and put each half into a breadboard to hold them
steady. Place the breakout on top and solder the side pins. Will
last you years and years.