Datasheet

2
4
6
7
8
8
9
9
11
11
11
11
11
13
14
16
16
16
19
19
20
21
22
22
22
23
24
24
25
25
26
30
31
34
34
34
34
34
36
38
Guide Contents
Guide Contents
Introduction
Guided Tour
Pinouts
Power Pins
GPIO Pins
USB Pins
Reset and Regulator Output
Starting the Bootloader
About the bootloader
Trinket USB Drivers for Windows
Special Notes on using Trinket with Linux
How to start the bootloader
Windows Driver Installation
Manual Driver Installation
Setting up with Arduino IDE
Arduino IDE Setup
Blink!
Something Went Wrong!
If you get the error message avrdude: Error: Could not find USBtiny device (0x1781/0xc9f)
If you get a lot of red text, errors and also a warning about Verification Failed
On Linux if you get the error message "usbtiny_receive: error sending control message: Protocol error (expected
4, got -71)"
Programming with Arduino IDE
pinMode() & digitalWrite() & digitalRead()
analogRead()
analogWrite()
Wire (i2c)
More...
Programming with AVRdude
The Short Way
The Long Way
Uploading with AVRdude
Programming in a Blink example
16MHz vs 8MHz Clock
Power Tradeoffs
How to activate the 16 MHz clock
...on AVR-GCC
...Arduino IDE
Repairing bootloader
Downloads
© Adafruit Industries https://learn.adafruit.com/introducing-trinket Page 2 of 43