Data Sheet

a-Si TFT LCD Single Chip Driver
240RGBx320 Resolution and 262K color
ILI9341
The information contained herein is the exclusive property of ILI Technology Corp. and shall not be distributed,
reproduced, or disclosed in whole or in part without prior written permission of ILI Technology Corp.
Page 103 of 233
8.2.13. Partial Mode ON (12h)
12h PTLON (Partial Mode On)
D/CX RDX WRX D17-8 D7 D6 D5 D4 D3 D2 D1 D0 HEX
Command 0 1 ↑ XX 0 0 0 1 0 0 1 0 12h
Parameter No Parameter
Description
This command turns on partial mode The partial mode window is described by the Partial Area command (30H). To leave
Partial mode, the Normal Display Mode On command (13H) should be written.
X = Don’t care
Restriction This command has no effect when Partial mode is active.
Register
Availability
Status Availability
Normal Mode On, Idle Mode Off, Sleep Out Yes
Normal Mode On, Idle Mode On, Sleep Out Yes
Partial Mode On, Idle Mode Off, Sleep Out Yes
Partial Mode On, Idle Mode On, Sleep Out Yes
Sleep In Yes
Default
Status Default Value
Power On Sequence Normal Display Mode ON
SW Reset Normal Display Mode ON
HW Reset Normal Display Mode ON
Flow Chart See Partial Area (30h)