Data Sheet

a-Si TFT LCD Single Chip Driver
240RGBx320 Resolution and 262K color
ILI9341
The information contained herein is the exclusive property of ILI Technology Corp. and shall not be distributed,
reproduced, or disclosed in whole or in part without prior written permission of ILI Technology Corp.
Page 124 of 233
8.2.27. Tearing Effect Line OFF (34h)
34h TEOFF (Tearing Effect Line OFF)
D/CX RDX WRX D17-8 D7 D6 D5 D4 D3 D2 D1 D0 HEX
Command 0 1 ↑ XX 0 0 1 1 0 1 0 0 34h
Parameter No Parameter
Description
This command is used to turn OFF (Active Low) the Tearing Effect output signal from the TE signal line.
X = Don’t care.
Restriction This command has no effect when Tearing Effect output is already OFF.
Register
Availability
Status Availability
Normal Mode On, Idle Mode Off, Sleep Out Yes
Normal Mode On, Idle Mode On, Sleep Out Yes
Partial Mode On, Idle Mode Off, Sleep Out Yes
Partial Mode On, Idle Mode On, Sleep Out Yes
Sleep In Yes
Default
Status Default Value
Power On Sequence OFF
SW Reset OFF
HW Reset OFF
Flow Chart
TE Line Output ON
TEOFF(34h)
TE Line Output OFF
Command
Parameter
Action
Mode
Legend
Sequential transfer
Display