Data Sheet

System and identification registers STMPE610
18/56 Doc ID 15432 Rev 4
7 System and identification registers
Table 12. System and identification registers map
CHIP_ID Device identification
Address: 0x00
Type: R
Reset: 0x0811
Description: 16-bit device identification
ID_VER Revision number
Address: 0x02
Type: R
Reset: 0x03
Description: 16-bit revision number
SYS_CTRL1 Reset control
Address: 0x03
Type: R/W
Reset: 0x00
Description: The reset control register enables to reset the device
Address Register name Bit Type Reset Function
0x00 CHIP_ID 16 R 0x0811 Device identification
0x02 ID_VER 8 R 0x03
Revision number
0x01 for engineering sample
0x03 for final silicon
0x03 SYS_CTRL1 8 R/W 0x00 Reset control
0x04 SYS_CTRL2 8 R/W 0x0F Clock control
0x08 SPI_CFG 8 R/W 0x01 SPI interface configuration
76543 2 1 0
RESERVED SOFT_RESET HIBERNATE
[7:2] RESERVED
[1] SOFT_RESET: Reset the STMPE610 using the serial communication interface
[0] HIBERNATE: Force the device into hibernation mode.
Forcing the device into hibernation mode by writing ‘1’ to this bit would disable the hot-key
feature. If the hot-key feature is required, use the default auto-hibernation mode.