Data Sheet

 USING LCD MODULES
Installing LCD Modules
The hole in the printed circuit board is used to fix LCM as shown in the picture below. Attend to the following items
when installing the LCM.
(1) Cover the surface with a transparent protective plate to protect the polarizer and LC cell.
(2) When assembling the LCM into other equipment, the spacer to the bit between the LCM and the fitting plate
should have enough height to avoid causing stress to the module surface, refer to the individual specifications for
measurements. The measurement tolerance should be ±0.1mm.
Precaution for assemble the module with BTB connector:
Please note the position of the male and female connector position, don’t assemble or assemble like the method
which the following picture shows
Precaution for soldering the LCM
Manual soldering Machine drag soldering Machine press soldering
No RoHS
product
290°C ~350°C.
Time : 3-5S.
330°C ~350°C.
Speed : 4-8 mm/s.
300°C ~330°C.
Time : 3-6S.
Press: 0.8~1.2Mpa
RoHS
product
340°C ~370°C.
Time : 3-5S.
350°C ~370°C.
Time : 4-8 mm/s.
330°C ~360°C.
Time : 3-6S.
Press: 0.8~1.2Mpa
P.31
MULTI-INNO TECHNOLOGY CO.,LTD.
MODULE NO.: MI0283QT-11
Ver 1.2