Data Sheet

STMPE610 Maximum rating
Doc ID 15432 Rev 4 45/56
13 Maximum rating
Stressing the device above the ratings listed in the “Absolute maximum ratings” table may
cause permanent damage to the device. These are stress ratings only, and operation of the
device at these or any other conditions above those indicated in the operating sections of
this specification is not implied. Exposure to absolute maximum rating conditions for
extended periods may affect device reliability.
13.1 Recommended operating conditions
Table 18. Absolute maximum ratings
Symbol Parameter Value Unit
V
CC
Supply voltage 4.5 V
V
IO
GPIO supply voltage 4.5 V
ESD ESD protection on each GPIO pin (air discharge) 4 kV
T Operating temperature -40 - 85 °C/W
T
STG
Storage temperature -65 - 155 °C/W
T
J
Thermal resistance junction-ambient 96 °C/W
Table 19. Power consumption
Symbol Parameter Test condition
Value
Unit
Min Typ Max
Vcc I/O supply voltage
Vio >= Vcc
1.65
−
3.6 V
V
IO
Core supply voltage 1.65
−
3.6 V
I
CC-active
Core supply current
Touchscreen
controller at 100 Hz
sampling
V
CC
=1.8− 3.3 V
−
0.5 1.0 uA
I
IO-active
I/O supply current
Touchscreen
controller at 100 Hz
sampling
V
IO
=1.8V
−
0.8 1.2 mA
I
IO-active
I/O supply current
Touchscreen
controller at 100 Hz
sampling
V
IO
=3.3V
−
2.0 2.8 mA
I
CC-
hibernate
Core supply current
Hibernate state, no
I2C/SPI activity
V
CC
=1.8V
−
0.5 1 uA