Data Sheet

Pinouts

There's two versions of the shield. One has a resistive touch screen, one has a capacitive one. The

TFT display and pinouts is the same for both. The microSD card is the same too. The differences

come in on the touch screen controller

TFT Screen Pins

Digital #13 or ICSP SCLK - This is the hardware SPI clock pin. By default its digital #13. By

cutting a jumper and soldering another on the back, you can move this line from #13 to the

ICSP clock pin. This pin is used for the TFT, microSD and resistive touch screen data clock

Digital #12 or ICSP MISO - This is the hardware SPI master-in-slave-out pin. By default its

digital #12. By cutting a jumper and soldering another on the back, you can move this line

from #12 to the ICSP MISO pin. This pin is used for the TFT, microSD and resistive touch

screen data

Digital #11 or ICSP MOSI - This is the hardware SPI master-out-slave-in pin. By default its

digital #11. By cutting a jumper and soldering another on the back, you can move this line

from #11 to the ICSP MOSI pin. This pin is used for the TFT, microSD and resistive touch