Data Sheet

screen data

Digital #10 - This is the TFT CS (chip select pin). It's used by the Arduino to tell the TFT that

it wants to send/receive data from the TFT only

Digital #9 - This is the TFT DC (data/command select) pin. It's used by the Arduino to tell the

TFT whether it wants to send data or commands

Resistive Touch Controller Pins

Digital #13 or ICSP SCLK - This is the hardware SPI clock pin. By default its digital #13. By

cutting a jumper and soldering another on the back, you can move this line from #13 to the

ICSP clock pin. This pin is used for the TFT, microSD and resistive touch screen data clock

Digital #12 or ICSP MISO - This is the hardware SPI master-in-slave-out pin. By default its

digital #12. By cutting a jumper and soldering another on the back, you can move this line

from #12 to the ICSP MISO pin. This pin is used for the TFT, microSD and resistive touch

screen data

Digital #11 or ICSP MOSI - This is the hardware SPI master-out-slave-in pin. By default its

digital #11. By cutting a jumper and soldering another on the back, you can move this line

from #11 to the ICSP MOSI pin. This pin is used for the TFT, microSD and resistive touch

screen data

Digital #8 - This is the STMPE610 Resistive Touch CS (chip select pin). It's used by the

Arduino to tell the Resistive controller that it wants to send/receive data from the STMPE610

only

Capacitive Touch Pins

SDA - This is the I2C data pin used by the FT6206 capacitive touch controller chip. It can be

shared with other I2C devices. On UNO's this pin is also known as Analog 4.

SCL - This is the I2C clock pin used by the FT6206 capacitive touch controller chip. It can be

shared with other I2C devices. On UNO's this pin is also known as Analog 5.

MicroSD card Pins

Digital #13 or ICSP SCLK - This is the hardware SPI clock pin. By default its digital #13. By

cutting a jumper and soldering another on the back, you can move this line from #13 to the

ICSP clock pin. This pin is used for the TFT, microSD and resistive touch screen data clock

Digital #12 or ICSP MISO - This is the hardware SPI master-in-slave-out pin. By default its

digital #12. By cutting a jumper and soldering another on the back, you can move this line

from #12 to the ICSP MISO pin. This pin is used for the TFT, microSD and resistive touch

screen data

Digital #11 or ICSP MOSI - This is the hardware SPI master-out-slave-in pin. By default its

digital #11. By cutting a jumper and soldering another on the back, you can move this line

from #11 to the ICSP MOSI pin. This pin is used for the TFT, microSD and resistive touch

screen data