Data Sheet

a-Si TFT LCD Single Chip Driver
240RGBx320 Resolution and 262K color
ILI9341
The information contained herein is the exclusive property of ILI Technology Corp. and shall not be distributed,
reproduced, or disclosed in whole or in part without prior written permission of ILI Technology Corp.
Page 31 of 233
7.1.6. Write Cycle Sequence
The WRX signal is driven from high to low and then be pulled back to high during the write cycle. The host
processor provides information during the write cycle when the display module captures the information from
host processor on the rising edge of WRX. When the D/CX signal is driven to low level, then input data on the
interface is interpreted as command information. The D/CX signal also can be pulled high level when the data on
the interface is RAM data or command’s parameter.
The following figure shows a write cycle for the 8080- MCU interface.
Note: WRX is an unsynchronized signal (It can be stopped)
InterfaceILI9341Host