Datasheet

Library Reference

class Adafruit_VS1053_FilePlayer

The Adafruit_VS1053_FilePlayer class is derived from the Adafruit_VS1053 class and provides high

level functions for playing files stored on the VS1053 breakout SD Card reader.

Public Methods:

Adafruit_VS1053_FilePlayer (int8_t mosi, int8_t miso, int8_t clk, int8_t rst, int8_t cs,

int8_t dcs, int8_t dreq, int8_t cardCS) - Software SPI constructor. Uses Software SPI, so

you must specify all SPI pins.

Adafruit_VS1053_FilePlayer (int8_t rst, int8_t cs, int8_t dcs, int8_t dreq, int8_t cardCS)

- Hardware SPI constructor. Uses Hardware SPI and assumes the default SPI pins. This is

what you'll likely use if you're using the shield.

boolean begin(void) - Initialize communication and reset the chip. Returns true if a VS1053

is found

boolean useInterrupt(uint8_t type) - Specifies the interrupt to use for interrupt-driven

playback. Valid arguments are:

VS1053_FILEPLAYER_TIMER0_INT

VS1053_FILEPLAYER_PIN_INT

boolean startPlayingFile(char *trackname) - Begin playing the specified file from the SD

card using interrupt-driven playback. This allows your program to perform other tasks as the

file is playing.

boolean playFullFile(char *trackname) - Play the complete file. This function will not return

until the playback is complete.

Public Member Variables:

File currentTrack - File currently being played

boolean playingMusic - True if playback in progress

class Adafruit_VS1053

https://learn.adafruit.com/adafruit-music-maker-shield-vs1053-mp3-

wav-wave-ogg-vorbis-player

Page 29 of 33