Datasheet

MB85RS64V
32 DS501-00015-4v0-E
MAJOR CHANGES IN THIS EDITION
A change on a page is indicated by a vertical line drawn on the left side of that page.
Page Section Change Results
10
RDID Revised the following description.
“In the RDID command, SO holds the output state of the last
bit after 32-bit Device ID output by continuously sending
SCK clock before CS is risen.”
“In the RDID command, SO holds the output state of the
last bit in 32-bit Device ID until /CS is risen.”
17
POWER ON/OFF SEQUENCE Defined values of tpu and tr at operation voltage.
Min Max Unit Condition
tpu 0.1 ms VDD 5.0 V 0.5 V Operation
0.6 ms VDD 3.3 V 0.3 V Operation
tr 100 ms/V VDD 5.0 V 0.5 V Operation
1 ms/V VDD 3.3 V 0.3 V Operation
18
NOTE ON USE
Revised the following description.
“Data written before performing IR reflow is not guaranteed
after IR reflow.”
“We recommend programming of the device after reflow.
Data written before reflow cannot be guaranteed.”
19
REFLOW CONDITIONS AND
FLOOR LIFE
Revised to following description.
[ JEDEC MSL ] : Moisture Sensitivity Level 3 (ISP/JEDEC J-
STD-020D)
CURRENT STATUS ON
CONTAINED RESTRICTED
SUBSTANCES
Changed the title and revised the description which refers to
a website.
20
ORDERING INFORMATION Changed the Minimum shipping quantity.
1 *
Added the following note below table.
*: Please contact our sales office about minimum shipping
quantity.
24
1.2 Tube Dry pack packing specifica-
tions
Changed the location of humidity indicator.