Datasheet

Final Assembly
The Zumo itself comes pre-assembled, minus the Leonardo processor. We just need to attach the
processor and camera assembly and connect the cables.
Attach the Camera to the Leonardo
Cut a piece of foam tape to fit in the recess in the
bottom of the pan/tilt base. (If you are using
narrower tape, you can use multiple pieces.)
Position the camera as shown on the bottom of the
Leonardo and press firmly to attach.
You can use the dotted line above the FCC/CE
logos for alignment!
© Adafruit Industries
https://learn.adafruit.com/pixy-pet-robot-color-vision-follower-using-
pixycam
Page 17 of 40