Datasheet

This sensor comes as a ultra-small 0.5mm pitch BGA, too hard to solder by hand. So we

stuck it on an easy-to-work-with breakout board. The sensor works with 2.5V to 5V logic so

it requires no logic level shifting. There are two address pins and using a funky method of

connecting the pins you can have up to 8 TMP007's connected to one i2c bus. We also

include a small piece of 0.1" breakaway header so you can easily solder to and use this

sensor on a breadboard. Two mounting holes make it easy to attach to an enclosure.