Version No.：A2 Issued Date: 2015/4/29 勁達國際電子有限公司 新北市中和區建康路 3 號 5 樓 Tel: +886-2-32340208 Fax: +886-2-32340547 Approval Sheet (產品承認書) 產品名稱 (Product): BT 4.1 Module (Nordic nRF51822) 產品型號 (Model No.): MDBT40 Series & MDBT40-P Series Advantages of MDBT40 & MDBT40-P Series 1. Long Working Distance MDBT40 Series: Over 80 meters in open space MDBT40-P Series: Up to 60 meters in open space 2. Declaration ID already included all Nordic applied profiles. 3.
Index List of Raytac’s Model No. ............................................................................................ 3 1. Overall Introduction ..................................................................................... 4 1.1 1.2 1.3 Applications ................................................................................................................... 4 Features .....................................................................................................................
List of Raytac’s Model No. Series MDBT40 MDBT40-P MDBT40 - ANT MDBT40 -ANT-P MDBT40 Nano MDBT40 -ANT-Nano Nordic Solution nRF51822 nRF51822 nRF51422 nRF51422 nRF51822 nRF51422 Raytac No.
1. Overall Introduction Raytac’s MDBT40 is a BT 4.0 & BT 4.1 stack (Bluetooth low energy or BLE) module designed based on Nordic nRF51822 SoC solution, which incorporates: GPIO, UART, I2C and ADC interfaces for connecting peripherals and sensors. The feature of the module: 1. Dual Transmission Mode of BLE & RF 2.4G upon customer preference. 2. Compact size with (L) 18 x (W) 10 x (H) 3.2 or 2.7 mm 3. Low power requirements, ultra-low peak, average and idle mode power consumption. 4.
1.2 Features . 2.4GHZ transceiver . -93dbm sensitivity in Bluetooth low energy mode . TX Power -20 to +4dbm . RSSI (1db resolution) . ARM Cortex – M0 32 bit processor . Serial Wire Debug (SWD) . S100 series SoftDevice ready . Memory . 256kb or 128kb embedded flash programmed memory . 16kb RAM or 32kb RAM . Support for non-concurrent multiprotocol operation . On-air compatibility with nRF24L series . Flexible Power Management . Supply voltage range 1.8V to 3.6V . 2.5us wake-up using 16MHz RCOSC . 0.
1.3 Profile & Service Information Profile & Service below are supported by MDBT40.
2. Product Dimension 2.
2.
2.3 Pin Assignment Pin No. Name Pin function (1)(2) GND Ground The pad must be connected to a solid ground plane (3) AVDD Power Analog power supply (4) P0.21 Digital I/O General-purpose digital I/O (5) P0.22 Digital I/O General-purpose digital I/O (6) P0.23 Digital I/O General-purpose digital I/O (7) P0.24 Digital I/O General-purpose digital I/O (8) P0.25 Digital I/O General-purpose digital I/O P0.
Pin No. Name Pin function P0.06 Digital I/O AIN7 Analog input ADC input 7 AREF1 Analog input ADC Reference voltage (24) P0.07 Digital I/O (25) GND Ground (26) P0.08 Digital I/O General-purpose digital I/O (27) P0.09 Digital I/O General-purpose digital I/O (28) P0.10 Digital I/O General-purpose digital I/O (29) P0.11 Digital I/O General-purpose digital I/O (30) P0.12 Digital I/O General-purpose digital I/O (31) P0.13 Digital I/O General-purpose digital I/O (32) P0.
4. Shipment Packaging Information Model Marking Photo Version 2 IC Version 3 IC Version 2 IC Version 3 IC Version 2 IC Version 3 IC MDBT40-128 (left) Black MDBT40-P128 (right) MDBT40-256 (left) Red MDBT40-P256 (right) MDBT40-256R (left) Yellow N/A MDBT40-P256R (right) - Packaging Type: Tray only - Minimum Package Quantity (MPQ): 88 pcs per Tray - Carton Contents: 1760 pcs per Carton (20 Full Tray + 1 Empty Tray) - Dimension of Carton: (L) 37 x (W) 20.5 x (H) 14 cm - Gross Weight: approx. 3.
5. Specification 5.1 Absolute Maximum Ratings 5.2 Operation Conditions Remark: Above operating temperature is applied in Version 3 IC. Operating temperature for Version 2 IC is -25℃ to 75℃ with typical 25℃.
5.3 Electrical Specifications 5.3.1 Radio Transceiver . General Radio Characteristics .
5.3.2.
5.3.
5.3.4 Radio Timing Parameters 5.3.5 RSSI Specifications 5.3.
5.3.
6.
7. Antenna 7.
7.
8. Reference Circuit 8.
8.2 nRF51822 Schematic with 1.
8.3 nRF51822 Schematic with Internal DC/DC Converter Remark: Version 3 supports Internal DC/DC Converter, which is not suggested to use in Version 2 IC.
9. Carrier Keep-Out Area Reference Item: MDBT40 / MDBT40ANT/MDBT40-P Carrier Board Keep Out Area 1. Carrier Board under the BLUE PART (antenna and test pin pad) Carrier Board is not allowed to have ground or circuit or components in any layer. 2. Carrier Board under the GREEN PART a. Suggest to equip ground full green area in first layer b. If first layer equipped ground, 2nd and 3rd layer can have circuit in this area. c. If first layer equipped ground, 4th layer can have components in this area.
10. Certification 10.1 Declaration ID Certification Remark: Ginstar Corporation is one of subsidiaries of Raytac Corporation.
10.
10.
10.
10.5 End-Product Label Customers are suggested using following label content for FCC, TELEC and NCC certification.
10.
10.
11. Current Consumption Reference Data (BT3.0 VS BT4.0) Mouse Power Consumption BT4.0 (Based on nRF51822) BT4.0 Mode RF2.4GHz BT3.0 2 x AAA 9.5 Months 10 Months 2.9 Months 2 x AA 21 Months 22 Months 6.2 Months Including Sensor BT4.0 (Based on nRF51822) BT4.0 Mode @ 1.5V RF2.4GHz @1.5V BT3.0 @3V Active-Mouse moving (4.3%) (7.5ms report rate) 5.4 mA 8.1 mW 5.8 mA 8.7 mW 8.7 mA 26.1 mW Rest 1>1s (4.1%) Link maintained Sensor latency: 20ms 900 uA 1.35 mW 350 uA No link 1.05 mW 1.24 mA 3.
12. BT 4.
13. nRF51 IC Compatibility with SDK & SoftDevice The SDK version must match with its corresponding softdevice version to make BLE work. Remark: Above table is extracted from document “nRF51 Series Compatibility Matrix v2.0”. Any updates shall refer to Nordic’s official release as final reference.
Release Note 2015/2/13 Version. A1: NCC certificate in Chapter 10 added. 2015/4/29 Version A2: (1) Added MDBT40-P Spec, RoHS Report, List of Raytac’s Model No. (2) Updated Chapter 8, 9, and 12, 13.
