Adafruit Perma-Proto HAT for Pi Mini Kit No EEPROM PRODUCT ID: 2310
DESCRIPTION - Design your own Pi HAT, attach custom circuitry and otherwise dress your Pi A+, B+, or Pi 2 with this jaunty prototyping HAT kit. To kick off the Adafruit HAT party, we have this Perma-Proto inspired plug in daughter board. It has a grid of 0.1" prototyping soldering holes for attaching chips, resistors, LED, potentiometers and more. The holes are connected underneath with traces to mimic the solderless breadboards you're familiar.
A bit of light soldering is required to attach the header to the PCB but it's easy work. This hat is only compatible with the Raspberry Pi A+, B+ or Pi 2! It will not work with the Raspberry Pi Model A or B. Our initial version has the +3V and +5V markings in blue, and the GND markings in red, future orders will have these colors swapped to better match a solderless breadboard http://www.adafruit.
Technical Details ​Header Dimensions: 5mm x 51mm x 12mm / 0.2" x 2" x 0.5" PCB Dimensions: 66mm x 57mm x 2mm / 2.6" x 2.2" x 0.
