Datasheet

AT+GATTADDCHAR

Adds a custom characteristic to the last service that was added to the peripheral (via

AT+GATTADDSERVICE).

# Clear any previous custom services/characteristics

AT+GATTCLEAR

# Add a battery service (UUID = 0x180F) to the peripheral

AT+GATTADDSERVICE=UUID=0x180F

# Add a battery measurement characteristic (UUID = 0x2A19), notify enabled

AT+GATTADDCHAR=UUID=0x2A19,PROPERTIES=0x10,MIN_LEN=1,VALUE=100

# Clear any previous custom services/characteristics

AT+GATTCLEAR

# Add a custom service to the peripheral

AT+GATTADDSERVICE=UUID128=00-11-00-11-44-55-66-77-88-99-AA-BB-CC-DD-EE-FF

# Add a custom characteristic to the above service (making sure that there

# is no conflict between the 16-bit UUID and bytes 3+4 of the 128-bit service UUID)

AT+GATTADDCHAR=UUID=0x0002,PROPERTIES=0x02,MIN_LEN=1,VALUE=100

AT+GATTADDCHAR must be run AFTER AT+GATTADDSERVICE, and will add the

new characteristic to the last service definition that was added.

As of version 0.6.6 of the Bluefruit LE firmware you can now use custom 128-bit

UUIDs with this command. See the example at the bottom of this command