Datasheet

Prepare the header strip:
Cut the strip to length if necessary. It will be
easier to solder if you insert it into a
breadboard - long pins down
Add the breakout board:
Place the breakout board over the pins so
that the short pins poke through the
breakout pads
And Solder!
Be sure to solder all pins for reliable
electrical contact.
(For tips on soldering, be sure to check out
our Guide to Excellent
Soldering (https://adafru.it/aTk) ).
© Adafruit Industries https://learn.adafruit.com/adafruit-feather-m0-bluefruit-le Page 26 of 238