User Manual

You should get something resembling the following output when you open the Serial Monitor at 9600 baud:

Arduino Usage

Here we'll explain the different calls to the INA260 library and their use

#include <Adafruit_INA260.h>

Adafruit_INA260 ina260 = Adafruit_INA260();

void setup() {

Serial.begin(115200);

// Wait until serial port is opened

while (!Serial) { delay(10); }

Serial.println("Adafruit INA260 Test");

if (!ina260.begin()) {

Serial.println("Couldn't find INA260 chip");

while (1);

}

Serial.println("Found INA260 chip");

}

void loop() {

Serial.print("Current: ");

Serial.print(ina260.readCurrent());

Serial.println(" mA");

Serial.print("Bus Voltage: ");

Serial.print(ina260.readBusVoltage());

Serial.println(" mV");

Serial.print("Power: ");

Serial.print(ina260.readPower());

Serial.println(" mW");

Serial.println();

delay(1000);

}

https://learn.adafruit.com/adafruit-ina260-current-voltage-power-sensor-

breakout

Page 15 of 24