Datasheet

This is the FeatherWing Quad Side-by-Side - a prototyping add-on and

more for all Feather boards. This is similar to the FeatherWing

Proto except there are four! The magic of the Quad comes when you

want to connect your Feather to three other Feather Wings without

needing any stacking headers! The Quad comes with:

 1 Quad Side-by-side Wing PCB

 4 sets Feather Female Headers

PAGE 1
This is the FeatherWing Quad Side-by-Side - a prototyping add-on and more for all Feather boards.
PAGE 2
The Quad, like the Proto, has three breakouts for each pin on a Feather, as well as a bunch of plain grid proto holes. Also, the four sets of pins are cross connected and for GND and 3.3V, giving you a full strip of connected pads. You'll need to solder on the female headers to the PCB, the Quad comes as a mini kit! Also available is the Quad FeatherWing as a 2x2 kit for a slightly different arrangement. PCB dimensions (unassembled): 95 x 50 x 1.