Datasheet

Revised Date:
April 16, 2007
ds_pl2303HXD_v1.1.doc
11.0 Reel Packing Information
11.1 Carrier Tape (SSOP-28)
Figure 11-1a SSOP28 Carrier Tape
Notes:
1. 10 sprocket hole pitch cumulative tolerance ±0.2
2. Camber not to exceed 1mm in 100mm.
3. Material: Black Polystyrene.
4. Ao and Bo measured on a plane 0.3mm above the bottom of the pocket.
5. Ko measured from a plane on the inside bottom of the pocket to the top surface of the carrier.
6. Pocket position relative to sprocket hole measured as true position of pocket, not pocket hole.
7. IC quantity per one reel: 1,000 (min) ~ 2,000 (max)
Figure 11-1b IC Reel Placements
PL-2303HX (Rev D) Product Datasheet - 25 - Document Version 1.1