User manual

4 © Adam Equipment Company
2012
3.0 INSTALLATION
3.1 UNPACKING
The ABK/AFK scales have already been adjusted to work with a platform and
have been configured for this application. The platform and indicator have
been calibrated as a pair and must be used together.
3.2 LOCATING
• The scales should not be placed in a location that
will reduce the accuracy.
• Avoid extremes of temperature. Do not place in
direct sunlight or near air conditioning vents.
• Avoid unsuitable tables. The table or floor must be
rigid and not vibrate.
• Avoid unstable power sources. Do not use near
large users of electricity such as welding equipment
or large motors.
• Do not place near vibrating machinery.
• Avoid high humidity that might cause condensation.
Avoid direct contact with water. Do not spray or
immerse the scales in water.
• Avoid air movement such as from fans or opening
doors. Do not place near open windows or air-
conditioning vents.
• Keep the scales clean. Do not stack material on the
scales when they are not in use.